The Best Pci Slot Fan – 2022

After hours of researching and comparing all models on the market, we find out the Best Pci Slot Fan of 2022. Check our ranking below.

Our Picks For The Top Pci Slot Fan


Bestseller No. 1
Gelid Solutions PCI Slot Fan Holder|2 x Slim 120mm UV Blue Fan|High Airflow with Quiet Operation|SL-PCI-02|Blue
  • Two Slim 12 UV Blue Fan
  • High Airflow with Quiet Operation
  • Two Slot Design with Air Intake Holes & Dust Filter
  • Bundled with Fan Y-Cable Connector
SaleBestseller No. 2
StarTech.com Expansion Slot Rear Exhaust Cooling Fan with LP4 Connector (FANCASE), Black
  • Fits in standard full-height/full-profile computer cases
  • Can be used to pull in air from the top to vent out the rear, or pull in air from the bottom to vent out the rear
  • Ball bearing fan; Inline LP4 power connectors; 12V @ 0.15A, 1.8W; 6.9 CGM @ 2,200 RPM; 32 dBA; MTBF: 37,739 hours; Black plastic housing; Reversible bracket
  • NOTE: Does not support PWM for fan speed control and will operate at full speed
Bestseller No. 3
SCCCF 3x90mm 92mm Graphic Card Fans, Graphics Card Cooler, Video Card VGA Cooler, PCI Slot Fan GPU Cooler
  • 3 x 92mm fans combined into one interface, can be connected to the motherboard's 3-pin or 4-pin interface and you only need to access one interface to run all the fans
  • This cooling fan's total size is 11in(L) x 4.72in(W) x 1.18in(H), designed for most universal graphic card video card VGA cooling,just please check the size to make sure your pc has enough space
  • D-type interface cable included four interfaces, three voltages: 5V, 7V and 12V; different voltages with different airflow, speed and noise. You can select the appropriate voltage interface to start the fan
  • The double ball bearing has a service life of 65,000 hours, and the 7 blades produce strong airflow to keep the computer case cool
  • packing list: 3 x 92mm fans (PCI bracket screwed), 1 x multi-voltage cable ,1 x mini screwdriver,1 x fixing screw
Bestseller No. 4
Maxmoral 1-Pack Dual Fan Mount Rack PCI Slot Bracket for Video Card DIY Support 9cm/12cm Fan Computer Radiator Holder
  • Type: 1 Set PCI Slot Fan Mount Bracket, Simple design, easy operation, come with matched fixing screw fasteners, convenient to install.
  • Made of high quality metal material with fine workmanship, black stoving varnish surface, beautiful appearance, rust and corrosion resistance, durable to use.
  • Supply with 1 PCI slot brace and 2 fan connectors, used to mount dual PC cooling fan in one PCI slot bracket.
  • Effectively improve the system heat dissipation effect, reduce PC case noise, for more powerful performance.
  • Fit for 9cm, 12cm fan, good compatibility with most of graphics cards. Practical fan accessories for computer project DIY.
SaleBestseller No. 5
CCBBAA Fox-2 System Blower Computer Chassis Exhaust Cooling Fan PCI Slot Bit Fan Cooler Long Life Bearing Design High Air Flow
  • Overall dimensions of 111 x 90.6 x 34.6 mm
  • Bearing Type Ever Lubricate bearing ( Long life bearing)
  • Fan Speed 2800 ± 10% RPM
  • Voltage 12V DC
  • Noise level < 31 dBA
SaleBestseller No. 6
GDSTIME Graphic Card Fans, Graphics Card Cooler, Video Card Cooler, PCI Slot Dual 90mm 92mm Fans, VGA Cooler
  • Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable
  • Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 1in(H) in per fan. Totally Size: 185mm(L) x 120mm(W) x 30mm(H) / 7.28in(L) x 4.72in(W) x 1.18in(H)
  • Rated Voltage: DC 12V; Rated Current: 0.2Amp; Rated Speed: 2000 RPM; Air flow: 86CFM; Noise: 27dBA
  • D-type interface cable included four interfaces, three voltages: 5V 7V and 12V; Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan.
  • 2 fans combined into one interface, Can be connected to the motherboard's 3-pin or 4-pin interface and you only need to access one interface to run all the fans.
Bestseller No. 7
GPU Fan Cooler PCI Slot Triple 92mm 90mm Graphic Card Fans for Video Card VGA Cooler Fans Compatible with Tesla K80 R9 280 GTX 580 Nvidia GTX 970 RX570 r9 390x EVGA RTX 1080ti 2070 2080Ti
  • ❤UNIVERSAL GPU COOLER: PCI slot fan gpu cooler3 x 92mm mining rig fans xfx gpu cooler with total size 278x125x30mm (10.94x4.92x1.18inch) designed for most universal graphic card video card VGA cooling mining rig frame ,just please check the size to make sure your pc has enough space.
  • ❤5V 7V 12V VOLTAGE: 1x Power D-type interface cable ,four interface with 5V 7V 12V voltage sticker,choose different voltage to get airflow: 56CFM ,84CFM ,140CFM and different noise level.
  • ❤FAN SPLITTER CABLE:1x 4Pin fan splitter cable,you can combine 3x92mm fans into one interface to be connected with voltage cable.ignore it,Each fan can be worked independently,easy operation and replacement.
  • ❤PACKAGE INCLUDED: 3x92mm fans(PCI bracket screwed), 1x multi-voltage cable ,1x fan splitter cable.
  • ❤100% 90 DAY MONEY BACK : If you are not satisfied for any reason, simply return your product for a full refund, no questions asked. You have nothing to lose.
SaleBestseller No. 8
Wathai Pcl Slot Fan 90mm 92mm Fans Brushless Cooling Fan for Cooler VGA Graphic Card 7''
  • Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable
  • Rated Voltage:12V 0.2 A; Speed: 3000RPM; Air flow: 86.3CFM; Noise:37dBA; Bearing type: Sleeve Bearing ; Life: 35000 hours
  • D-type interface cable included four interfaces, three voltages: 5V 7V and 12V; Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan.
  • Warranty: One-year quality assurance. Please contact us If the product has any quality problems, it will be replaced within one year.
  • Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62x3.62x0.98 in. per fan; Totally Size: 185mm(L) x 120mm(W) x 30mm(H) / 7.28in(L) x 4.72in(W) x 1.18in(H)
Bestseller No. 9
Nincha 120 mm PC Fan Grills Dust-Proof Computer Mesh Pack of 5, with 5 PCI Slot Covers for PC case, Necessary Screws Included
  • Fan dust filter size: 20 x 120 x 0.45mm, mesh hole diameter is 1mm; PIC slot cover: 120x19.5x12.7mm , mesh hole diameter is 1.7mm.
  • The fan dust filter fits for 120mm fans or you can also cut it into appropriate size that fits the rest of the computer case; The PCI slot fits for the PCI slot, it can block dust while allowing the airflow.
  • The dustproof set keep your computer case clean, and let the computer hardwares in a good working condition. So it can extend the life-span of the fan and computer hardwares.
  • suitable for home computer chassis fan dust, speaker speaker grilles and a variety of electrical and electronic products speakers dust protection.
  • Note: Both the fan dust filters and the PIC slot cover contain the corresponding screws(20 screws for fan dust filters, 5 screws for PIC slots).
Bestseller No. 10
Bewinner Cooling Fan for Cooling Video Cards Mini System PCI Slot Blower CPU Case DC Cooling Fan New Cooling Fans PCI for Computer
  • 【Turbine Heat-Absorbing Fan】This video cards cooling fan uses a suction turbo fan. The turbo fan rotates to suck the waste heat stuck near the board, and then quickly dissipates heat through the I/O panel on the side, which can directly accelerate the temperature adjustment around the board.
  • 【Double Plug Design】This computer cooling fan has a large 4P power connector with two sets of plugs, which can be directly connected to the power socket of the chassis, and the dual-plug design can provide another connector when using one power connector, which does not occupy limited power interface.
  • 【A Variety Of Functions】Our chassis cooling fan is compact and versatile. It can cool the processor and memory and can also be used to cool the graphics card. Moreover, since the general chassis has 7 PCI slots, you don't have to worry about installing a heat sink, and it is easy to install and maintain.
  • 【Efficient Heat Dissipation】Our PCI cooling fan has high air volume and high static pressure. High-quality heat dissipation performance. It can be installed in almost all expansion slots and direct airflow to PCI fans that require more functions.
  • 【100% Guarantee】Our cooling fan size is 111*90*21mm.If you have any questions about our products while using them, please feel free to contact our 24/7 customer service, we will provide a professional assistant for you.


How Do You Buy The Best Pci Slot Fan?


Do you get stressed out thinking about shopping for a great Pci Slot Fan? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Pci Slot Fan, which is why we have assembled a comprehensive list of the greatest Pci Slot Fan available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Pci Slot Fan that you consider buying. Your questions might include the following:

  • Is it worth buying an Pci Slot Fan?
  • What benefits are there with buying an Pci Slot Fan?
  • What factors deserve consideration when shopping for an effective Pci Slot Fan?
  • Why is it crucial to invest in any Pci Slot Fan, much less the best one?
  • Which Pci Slot Fan are good in the current market?
  • Where can you find information like this about Pci Slot Fan?

We’re convinced that you likely have far more questions than just these regarding Pci Slot Fan, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Pci Slot Fan, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Pci Slot Fan. Make sure that you are only using trustworthy and credible websites and sources.


We provide an Pci Slot Fan buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Pci Slot Fan currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of Pci Slot Fan has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Pci Slot Fan?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your Pci Slot Fan.
  5. Customer Ratings: Number ratings grade Pci Slot Fan objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Pci Slot Fan.
  7. Product Quality: You don’t always get what you pay for with an Pci Slot Fan, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an Pci Slot Fan is should be an indication of how long it will work out for you. .

We always remember that maintaining Pci Slot Fan information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Pci Slot Fan is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here . Or You can read more about us to see our vision.

Leave a Reply

Your email address will not be published. Required fields are marked *